© 2013 amnova, llc amnova llc innovative building concepts
redstone MOMA™ system Installation Instructions
MATERIALS and TOOLS needed for application:
- redstone MOMA™ board - redstone™ SPECIAL ADHESIVE S - redstone™ PRIMER (spray bottle or paint roller) - circular saw or jigsaw - notched trowel
1. mark desired dimensions and cut board with jigsaw or circular saw to size
2. Bevel edges
3. apply redstone™ SPECIAL ADHESIVE S on board surface
4. press board with moderate pressure onto wall
5. apply redstone™ SPECIAL ADHESIVE S onto board edges...
6. ... and align second board with moderate pressure onto first board
7. remove excess adhesive. Tools can be cleaned directly after use with clean water
PROCESSING:
9. apply 1st layer of redstone™ FILLER or redstone™ SPECIAL     ADHESIVE S(*)
10. embedd redstone™ MESH 165 in 1st layer and let it dry
11. apply 2nd layer of redstone™ FILLER or redstone™ SPECIAL       ADHESIVE S(*)
(*) with redsone™ FILLER up to a level 5 finish can be achieved - with redstone™ SPECIAL ADHESIVE S a finish compared to sand finish can be achieved
8. apply redstone™ PRIMER on entire surface (sprayed or rolled on